More

    How To Set Up The Google WiFi System

    Set Up The Google WiFi System – Mesh Wi-Fi systems are a set of wireless routers that you place around your house. From there, they all connect and carpet-bomb your house with the best Wi-Fi signal possible. Luckily, Google WiFi is one of the mesh Wi-Fi systems on the market. In this guide, we will show you how to set up the Google WiFi system.

    To get rid of dead spots at all corners of your house or apartment, you need to set up Google Wi-Fi. Here’s how to set it up.

    • With the power cord and ethernet cable, unbox the Google WiFi units and grab one to use as the main unit that you’ll connect to your modem or router.  

    Don’t miss: How to Clean Your AirPods and their Case

    • Plug in the first Google WiFi unit into an outlet and connect the other end into the USB-C port on the bottom of the unit. 
    • Take the ethernet cable and plug one end into the ethernet port on your modem and the other end into the green Ethernet port on the Google WiFi unit. The Google WiFi unit will then power up automatically. 

    Also read: The Best VR Headsets For 2021

    • Download and install the Google WiFi app on your device. While the app downloads, make sure that the device has Bluetooth on.
    • Open the app and tap ‘Sign In’. Then sign in using your Google account. To find your Google account or to create a new one, tap ‘More Options’.

    Don’t miss: Valve Index Review: Everything You Need To Know

    • In the bottom-right corner, click “Get Started”.

    Also read: How To Use Google Chromecast Without WiFi

    Set Up The Google WiFi System

    The app will automatically begin looking for the Google WiFi unit that you connected. Once it finds it, you’ll be prompted to scan the QR code on the bottom of the unit. Do that with the camera on your phone by tapping on “Scan Code”, or enter in the code manually by selecting “Type Code”.

    • From the list, select your Google Wi-Fi location and click “Next”.  

    Also read: Here Are Top 12 Best Gaming PC In 2021

    • Enter a name for your Wifi network. Tap ‘Next’.

    Don’t miss: Here Are The Top 12 Best Gaming Laptops for 2021

    It is best to give the network a new name to prevent connecting to the old network.

    • On the next screen, enter a password that users will type in to access the network. Then click “Create Network”.

    The app will download the Google Wifi software. Allow at least two minutes for the software download to complete. The light on the Wifi point will turn solid teal when the download and setup are complete. 

    • Go into your device’s settings and switch to your new Wi-Fi network that was created by Google WiFi.

    Also read: HDMI 2.1 – Why The New Cable Standard Matters

    • Go back into the app and begin the process of setting up more Google WiFi units around your house. Select how many units you want and click “Next”.
    • Plug in the next Google WiFi unit and hit “Next” in the app until you get to the room selection screen. Just like before, select the room that your second unit is located in and hit “Next”.

    Don’t miss: How To Easily Cast Android Screen To Roku TV

    • Once it’s connected, click “Test Now” in the bottom-right corner to test if the unit is sufficient

    Also read: What Is An IPS Monitor: Everything You Need To Know

    • Give it a minute to run the test, and when it’s done, tap on “Next”. If it says there was a problem, then you’ll need to move your second unit a bit closer to the main unit to get a better connection.

    You’ll repeat this same process for setting up your third Google WiFi unit, including where it’s located and running the Wi-Fi test.

    After that, an overview of your Wi-Fi network will show on the screen. Make sure everything looks good and then tap on “Next”.

    • Update your Google Wi-Fi unit. Once the update is complete, tap on “Explore” to be taken to the main screen of the app.

    Don’t miss: What You Need To Know About PCIe SSD

    You’ll then have three tabs to choose from. The first tab is the main screen of sorts where various cards appear when something new happens to your network.

    The middle tab shows you an overview of your Wi-Fi network, while the last tab is where all of the settings are, like guest Wi-Fi, setting up family Wi-Fi, and performing network tests.

    Also read: What is MU-MIMO And Why Do I Need It On My Router?

    That’s all! Now you can set up your Google Wi-Fi system.

    Editor’s picks:

    Just In

    Editor's Picks

    Most Popular

    Related Stories

    2 Comments

    Leave A Reply

    Stay on op - Ge the daily news in your inbox