Tech

Latest In

Tech

How to Fix Client and Server-Side VPN Error 800

In this guide, we'll explain how to fix client and server-side VPN error 800. Read how to deal with the VPN error 800 on Windows 10 in a most effective way

Author:Daniel BarrettMay 30, 202212220 Shares313342 Views
A Virtual Private Network provides a secure connection between a local client and a remote server over the internet. When you attempt to connect to a VPN and cannot, you receive a VPN error message. There are hundreds of possible error codes, but only a few are common.

What Causes VPN Error 800

Unfortunately, the error code in question does not properly explain what stands behind the problem.
The possible causes might be:
  • A network firewall is blocking the VPN traffic
  • Conflicting software
  • Network issues
  • Wrong server names or addresses
This list is not limited, so make sure to give all the troubleshooting steps below a try – no possible culprit should be neglected.

How to Fix the VPN error 800?

To help you, we have prepared an exhaustive guide that contains all the possible information on how to deal with the VPN error 800on Windows 10 in the most effective way.

Check Network Connection Between the Client and Server

You can attempt to ping the server if you aren’t sure, although VPN servers can be configured to ignore ICMP requests. Retrying the connection after waiting a minute or two can work with sporadic network outages. Attempting a connection from a different client device can also help pinpoint whether the connectivity issue is specific to one client or if it is a widespread problem.
Also read:How To Watch Netflix With NordVPN In Or Outside The US

Check Your VPN Server Name, Address and Password

Make sure your VPN name and address are correct – they should match the ones set by your VPN administrator. The point is, you might have accidentally mistyped them. Besides, some VPN servers occasionally change their addresses.

Make Sure Your Firewall isn’t Blocking VPN Connections

To determine whether a client firewall triggers VPN error 800, temporarily disable it and retry the connection. Firewall-related failures indicate a need to update the firewall configuration with additional settings specific to the port numbers the VPN on that network uses—usually TCP port 1723 and IP port 47 for Microsoft Windows VPNs.

Flush Your DNS Cache

VPN connection errors often stem from a corrupted DNS cache. So, try flushing it to fix your issue:
Press the Windows logo key + X shortcut on your keyboardSelect Command Prompt (Admin) from the list of optionsInput the following commands separately:
netsh interface ip delete arpcacheipconfig /flushdnsipconfig /renew
  • Exit your Command Prompt and restart Windows
  • Check if you can connect to your VPN now
Editor’s picks:
Jump to
Daniel Barrett

Daniel Barrett

Author
Latest Articles
Popular Articles