Saturday, May 21, 2022
- Advertisement -

How To Easily Fix PS4 (PlayStation) Beeping Issue

In this article, we will be explaining how to fix the PS4 (PlayStation) beeping issue.

PlayStation 4 is a home game console launched by Sony Computer Entertainment in 2013. However, this console is the best and most used if you face a beeping issue on your device. In this article, we will be explaining how to fix the PS4 (PlayStation) beeping issue.

Some people report that they have encountered a PS4 beeping issue. In some cases, the PS4 beeps, trying to eject a disc continuously. But in other cases, the PS4 beeps randomly, and nothing else happens.

Why Does My PS4 Keep Beeping? 

Your console beeps continuously when your PlayStation 4 console detects a significant hardware issue such as faulty connections or a loose manual eject screw. In addition, overheating problems often cause your PS4 to beep to alert you that something’s not right, and you risk damaging your hardware.

How To Fix PS4 Beeping Issue

By following the methods listed below, you can fix your PS4 beeping issue yourself without any problem: 

Method 1: Turn PS4 Off and On Again

Turning the PS4 Off and On again can solve the problem. However, some users had solved the problem using this method. Here you go:

  • Push the Power Button To turn off your Console.
  • Now, unplug the power, HDMI cables, and DS4 power cable.
  • Press and hold down the power button for 30 seconds until you hear two beeps.
  • After five minutes, plug the system back in and switch it back on.
  • Now, rerun your console and see if the problem persists.

Method 2: Air Dust Your Console

Dust particles may also cause strange beeps on PS4. The only way to fix this problem is to air dust the device. First, remove the front plate, dust everything, and make sure the fan spins smoothly. Then, put the plate back on and check if the beep persists.

Method 3: Install The Latest PS4 System Software Update

  • Go to Settings to check the system software.
  • Check out the PS4 System Software page and update the latest version of the system software.

Method 4: Tighten The Manual Eject Screw

Your console beep issue can be fixed by tightening the eject screw. Here’s how to get it done:

  • First, unplug the power cable and every other thing from the console.
  • Then, push the Power Button to turn off the console.
  • Open the top of your PS4 > tighten the manual eject screw. Press it down a bit, and you should be able to give it around six turns.
  • Add a piece of scotch tape over the eject button and put the top back on.
  • Plug everything back in > connect the controller to the console
  • Hold down the power button until you hear two beeps to start the console in Safe Mode
  • Select the option Rebuild database.

Editor’s picks:

Diekola Jubril
Diekola Jubril
Passionate for gaming and exploring nature, I face every task as a new challenge to bring my skills to the next level.
- Advertisement -

Latest Posts

- Advertisement -

Editor's Picks

Related news